Product Type: Undercoat
Size: 1L, 5L
- May be used on primed steel and timber, and on sealed cement, hardboard, composition boarding, and other materials used in the construction industry.
Universal undercoat for primed and sealed surfaces
Dulux Undercoat for All Surfaces is a general purpose undercoat for use as an intermediate for decorative topcoats, for interior and exterior use.
Reinforces adhesion and durability of the end coat
Number of coats: After application, the dry, hard film should be lightly sanded to give a smooth finish before over coating with two coats finishing paint. Can be over coated with most Dulux decorative finishes.
Preparing the surfaces: Suitable for cement plaster, gypsum plaster, concrete, fibre cement, PVC, galvanised iron, ferrous and wooden surfaces provided that appropriate preparation and priming is carried out.
Painting: Brush, roller or airless spray
Health and Safety: “For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Flash Point 37ºC. “